PRODUCTS
DISMANTLING JOINT
MATERIAL:BODY:Ductileirongrade500-7/450-12inaccordancewithISO1083orASTMA536.GLAND：Ductileirongrade500-7/450-12inaccordancewithISO1083orASTMA536.GASKET:RubberE.P.D.M.inaccordancewithEN681.1TIERODSANDT-
classification
FITTINGS
E-mail：
Inquiry
MATERIAL:
BODY:
Ductile iron grade 500-7/ 450-12 in accordance with ISO 1083 or ASTM A536.
GLAND：
Ductile iron grade 500-7/ 450-12 in accordance with ISO 1083 or ASTM A536.
GASKET:
Rubber E.P.D.M. in accordance with EN 681.1
TIE RODS AND T-BOLTS AND NUTS：
Carbon steel grade 4.8 or 8.8 with Galvanized or coating or Dacromet according to customers' requirement.
FLANGE：
PN10 or PN16 drillings in accordance with ISO 7005-2/EN 1092-2.
WORKING PRESSURE:
16 Bar or 250 PSI
FLUID TEMPERATURE:
0°C-50°C， excluding frost.
COATING：
Externall coatings:
liquid epoxy painting;
epoxy applied by FBE；
according to customers' requirements.
Internall coatings：
liquid epoxy painting;
epoxy applied by FBE；
according to customers' requirements.
REFERENCE RULES:
Designed and tested in accordance with EN 14525, ANSI/AWWA C219 and EN 545.
USE：
Dismantling Joint is assembled by a double flanged compositive fitting acting a retractile action between a flanged spigot and a flange adaptor.
It designed to provide longitudinal adjustment in flanged systems. It provide a simple method for the installation and removal of flanged products
by adjusting the distance between two flanged products and turning round.
Note: The accessories for Dismantling Joint are usually supplied by assembled on the body.
MESSAGES BOARD